Ключевые слова: HTS, REBCO, tapes, CORC cables, canted-cosine-theta coils, magnets dipole, homogeneity, design, design parameters, fabrication, prototype, test results, nitrogen liquid
Ключевые слова: MRI magnets, shimming, coils, induction, links, high field magnets, modeling computational, numerical analysis
Falhan M.F., Pratama R., Rochman L.P., Effendi R.S., Maryati Y., Widyaiswari U., Sari D.P., Saragi T., Risdiana R.
Ключевые слова: bulk, substitution, X-ray diffraction, lattice parameter, susceptibility, magnetic moment
Maksoud W.A., Duraсona U., Allard J., Baudouy B., Berriaud C., Calvelli V., Denarie L., Dilasser G., Donga T., Drouen Y., Godon P., GODON R., Guihard Q., Jurie S., Juster F.-., Lorin C., Lottin J.-., Millot J.-., Moliniй F., Nunio F., Pontarollo T., Correia-Machado R., Scola L., Segrestan L., Solenne N., Stacchi F.
Scola L., Lorin C., Maksoud W.A., Berriaud C., Godon P., Solenne N., Stacchi F., GODON R., Duraсona U., Pontarollo T., Donga T., Drouen Y., Jurie S., Correia-Machado R., Segrestan L.
Ключевые слова: proton irradiation, accelerator magnets, HTS, REBCO, tapes, coils, design, heat loads, cryogenic systems, cooling technology, numerical analysis
Ключевые слова: gravity, sensors, joints superconducting , Nb, electron beam evaporation, welding, joint resistances, fabrication
Angurel L.A., Fuente G.F., Martinez E., Yetis H., Belenli I., Gajda D., Zaleski A., Karaboga F., Aksoy C., Avci D., Babij M., Tanyildizi F.M., Tran L.M.
Ключевые слова: MgB2/Fe, wires monofilamentary, fabrication, diffusion process, PIT process, microstructure, critical caracteristics, current-voltage characteristics, transport currents, temperature dependence, magnetic field dependence, critical current density, mechanical properties, bending process, optical imaging, cores, thickness dependence
Sun X., Chen F., Yang X., Chen W., Bian X., Li M., Ge R., Xu M., Gao Y., Wang J., Lu H., Cao J., Li Z., Zhang Z., Ye R., Zhang X., Li S., Yin B., Yang M., Gong L., Ji D., Bian L., Liang R., Sun Y., Shi H.
Ключевые слова: wiggler, LTS, NbTi, coils, multipole magnets, magnetic field distribution, fabrication, cryogenic systems, cryostat, quench protection, test results
Ключевые слова: rotating characteristics, motors, HTS, YBCO, tapes, coils racetrack, stators, ripple, design, cryogenic systems, cryostat, ac losses, operational performance, design, design parameters
Ding H., Li G., Yan L., Liu Z., Lu L., Yang G., Zhang Q., Zhao J., Qiu X., Gu G., Yang F., Qian T., Zhong Y., Tang C., Shen J., Gan Y., Phan G.N., Sui Q.
Ключевые слова: Bi2212, single crystals, doping, annealing process, phase diagram, X-ray diffraction, microstructure, resistance, Hall effect, fabrication, experimental results
Ключевые слова: wind farms application, rotating characteristics, HTS, REBCO, stators, generators, design parameters, weight, conventional systems, comparison
Ключевые слова: MgB2, wires, heat treatment, barriers, ex-situ process, diffusion process, composition, microstructure, Jc/B curves, fabrication
Ключевые слова: LTS, Nb3Sn, filaments, thermal conductivity, strands, microstructure, homogeneity, modeling, thermal expansion, mechanical properties, numerical analysis
Ключевые слова: wiggler, magnets, LTS, NbTi, design, fabrication, cryogenic systems, cryostat, thermal performance, heat loads, temperature distribution, experimental results
Ключевые слова: LTS, Nb3Al, phase transition, mechanical properties, stability, lattice parameter, elastic behavior, pressure dependence
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.